How to use automatic male masturbator cup

Using an automatic male masturbator from the store 

https://sexand.toys/products/automatic-male-masturbator-cup typically involves a few simple steps:

Charge or Insert Batteries: 

Depending on the specific model of the automatic male masturbator, the device might either be rechargeable or powered by batteries. Here's a step-by-step guide for both scenarios:

Rechargeable Device:

  1. Charging: Before using the device, ensure it's fully charged. Connect the charger or USB cable to the device's designated port and plug it into a power source. Follow the manufacturer's instructions regarding the charging time needed for a full charge.

  2. Check Battery Level: Some devices might have indicators, such as LED lights, to display the battery level or charging status. Allow sufficient time for a complete charge before use.

  3. Use and Enjoy: Once the device is fully charged, it's ready for use. Proceed with the steps for insertion, lubrication, and operation as recommended by the manufacturer.

Battery-Powered Device:

  1. Battery Insertion: Open the compartment designated for batteries according to the manufacturer's instructions. Insert the required batteries (e.g., AA or AAA) in the correct orientation as indicated inside the compartment.

  2. Close Compartment: Ensure the battery compartment is securely closed and properly sealed to avoid water damage or malfunction during use.

  3. Power On: Some devices might have a power button or switch. Turn on the device to check if the batteries are properly inserted and functioning.

  4. Use and Enjoy: Once the batteries are inserted and the device is powered on, follow the recommended steps for lubrication, insertion, and operation provided by the manufacturer.

Clean and Lubricate:

Here's how to clean and lubricate an automatic male masturbator:

Cleaning:

  1. Turn Off and Disconnect: Ensure the device is turned off and disconnected from any power source before cleaning.

  2. Disassemble if Possible: If the device allows for disassembly or has removable parts, carefully take it apart according to the manufacturer's instructions. This makes the cleaning process more thorough.

  3. Rinse Removable Parts: Rinse the removable parts under lukewarm water. Use mild, unscented soap or a designated toy cleaner to gently wash the parts, ensuring all residues, lubricants, and body fluids are thoroughly removed.

  4. Careful Cleaning: Avoid submerging any electronic or motorized parts in water. Use a damp cloth with mild soap to clean these areas, ensuring they remain dry and moisture-free.

  5. Dry Completely: After cleaning, thoroughly dry all parts using a clean, lint-free cloth or allow them to air dry completely before reassembly or storage.

Lubrication:

  1. Choose the Right Lubricant: Select a water-based lubricant as it's safe to use with most materials and won't damage the device. Avoid silicone-based lubes that can degrade certain materials.

  2. Apply Lubricant: Before use, apply a generous amount of water-based lubricant to the opening or inner sleeve of the masturbator cup. Apply some lubricant to the penis for comfortable insertion and enhanced sensations.

  3. Reapply if Needed: During use, if the lubrication diminishes or if there's discomfort, feel free to reapply the lubricant to maintain a smooth and pleasurable experience.


Power On: 

When using an automatic male masturbator, the step of powering it on is essential to start the device. Here's a guide on how to power on an automatic male masturbator:

  1. Locate the Power Button or Switch: Check the device for a designated power button or switch. It's usually located on the handle, base, or control panel, depending on the model.

  2. Turn On the Device: Press or slide the power button or switch according to the manufacturer's instructions. This action initiates the device and enables its functions.

  3. Check for Indicator Lights or Sounds: Some devices might have indicator lights or make specific sounds to indicate that they're powered on and ready for use. Refer to the user manual for any specific indications your device may have.

  4. Select Settings or Modes (if applicable): Some automatic male masturbators offer multiple settings, vibration modes, or intensity levels. Once powered on, you might have the option to choose a preferred mode or setting using additional buttons or controls.

  5. Prepare for Use: With the device powered on, prepare for insertion by applying lubricant to the device's opening and on the penis. Ensure you're comfortable with the selected setting or mode before insertion.

  6. Insert and Enjoy: Carefully insert the penis into the opening of the masturbator cup, and once comfortably placed, enjoy the sensations provided by the device's automated movements or vibrations.

Always follow the manufacturer's instructions and guidelines regarding the proper usage, settings, and controls of your specific automatic male masturbator model. This ensures safe and optimal use while maximizing your enjoyment and satisfaction with the device.


Insertion:

!
ChatGPT

Insertion of an automatic male masturbator involves carefully placing the penis into the device's opening or sleeve. Here are steps to guide the insertion process:

  1. Prepare the Device: Ensure the automatic male masturbator is clean, powered on, and ready for use as per the manufacturer's instructions.

  2. Apply Lubrication: Before insertion, apply a water-based lubricant to the opening or inner sleeve of the masturbator cup. Additionally, apply a small amount of lubricant to the penis to facilitate comfortable insertion.

  3. Find a Comfortable Position: Sit or lie down in a comfortable position that allows easy access to the device. Ensure you're relaxed to ease the insertion process.

  4. Hold the Device Firmly: Grasp the masturbator cup firmly but gently, ensuring a secure grip while avoiding excessive pressure.

  5. Carefully Insert the Penis: Slowly and steadily insert the penis into the opening of the device. Use gentle pressure and proceed at a pace that feels comfortable. Avoid sudden, forceful movements.

  6. Adjust as Needed: Once the penis is inside, adjust your grip or the device if necessary to ensure a comfortable and snug fit. Ensure that the device's movements or vibrations, if applicable, are not causing discomfort.

  7. Explore Settings or Modes (if applicable): If the device offers various settings or vibration modes, you may explore these options to find the intensity or pattern that suits your preferences.

  8. Enjoy and Experiment: Once inserted, relax and explore the sensations provided by the device. Experiment with different modes or movements to find what feels most pleasurable.

Always refer to the manufacturer's instructions and guidelines specific to your automatic male masturbator model for proper usage, insertion techniques, and any additional tips for optimizing your experience with the device. Prioritizing comfort and taking your time during insertion helps ensure a more enjoyable and satisfying experience.


Enjoy and Experiment:

Once the automatic male masturbator is properly inserted and activated, the next step is to enjoy the experience and explore the device's various functions. Here's how to proceed:

  1. Relax and Get Comfortable: Ensure you're in a comfortable position and relaxed. This will help you fully immerse yourself in the experience.

  2. Explore Settings (if applicable): If the device offers multiple settings, vibration patterns, or intensity levels, take time to explore and cycle through these options. Use the controls or buttons provided by the device to adjust settings to your preference.

  3. Pay Attention to Sensations: Focus on the sensations and feedback provided by the device. Note what feels pleasurable and stimulating, and adjust settings accordingly to enhance your experience.

  4. Experiment with Movement: If the masturbator offers automated movements, suction, or other features, experiment with these functions to gauge their effects and find what feels most enjoyable.

  5. Control Pace and Pressure: Depending on the device's features, you might have control over the pace, pressure, or intensity. Experiment with different levels to find what suits you best.

  6. Stay Mindful of Comfort: Pay attention to your comfort levels throughout the experience. If anything feels uncomfortable or causes discomfort, adjust or stop using the device immediately.

  7. Take Your Time: Enjoy the experience at your own pace. There's no rush. Take time to explore and find the settings or movements that provide the most pleasure.

  8. Maintain Hygiene: If using the device for an extended period, periodically check and ensure the device remains clean and properly lubricated for continued comfort and hygiene.

  9. Relaxation and Cleanup: After you've finished using the device, power it off, and proceed with cleaning and maintenance as per the manufacturer's instructions.

Cleaning and Maintenance:

Cleaning and maintenance are crucial steps in using an automatic male masturbator to ensure hygiene, longevity, and optimal performance. Here's a guide:

  1. Power Off and Disconnect: Before cleaning, ensure the device is turned off and disconnected from any power source to prevent accidents.

  2. Disassemble (if applicable): If the device allows disassembly or has removable parts, carefully disassemble it according to the manufacturer's instructions. This aids in thorough cleaning.

  3. Rinse with Lukewarm Water: Rinse the device's removable parts under lukewarm water to remove any bodily fluids, lubricants, or residue. Avoid immersing electronic components if they're not waterproof.

  4. Use Mild Soap or Toy Cleaner: Apply a mild, unscented soap or specialized toy cleaner to clean the device's components. Gently scrub with your hands or a soft brush to ensure all areas are cleaned.

  5. Dry Completely: Thoroughly dry all parts using a clean, lint-free cloth or leave them to air dry completely. Ensure no moisture remains before reassembling or storing the device.

  6. Sanitization (if recommended): Some devices may have specific instructions for sanitization. If recommended by the manufacturer, use an appropriate sanitizing solution or method after cleaning.

  7. Reassemble (if disassembled): Carefully reassemble the device according to the manufacturer's instructions. Ensure all parts are securely fitted together.

  8. Storage: Store the clean and dry device in a cool, dry place away from direct sunlight. Consider using the original packaging or a designated storage pouch, if provided.

  9. Regular Maintenance: Follow the manufacturer's guidelines for regular maintenance. This may include periodic lubrication of moving parts (if applicable) or other maintenance routines.

  10. Frequency of Cleaning: Clean the device after each use to maintain hygiene. Even if not used regularly, it's essential to clean and dry the device before storage.

Voltar para o blogue